I want to give you a list of five plastic products that will yield immediate returns on investment.
The following five plastic products are in high demand in Nigeria:
1.Dust pan(s).
2.Hangers(s).
3.20 litrs paint bucket.
4.4 litrs paint bucket.
5.wash hand basin.
The first two are money spining products.
If you have a 180-200 tons machine,go for their moulds;trust me they are hurt plastic products Nigeria.
Friday 26 August 2011
How to Control Excess Flash On Plastic Products
Flashes on products amounts to loss and time wastage.
If a product comes out of a machine with flash all over it, it gives it an ugly and unpresentable outlook.
flashes are normally trimmed out of the product, before supply.
There are a number of ways to control flashes on products.
1. Clamp the mould:
IF your machine has not reached its farward limt,slightly increase mould advance,then check for changes.
2.Reduce first injection pressure:
Normally,the first injection is asigned the highest pressure,and thus play an important role in filling a product.if you reduce it, you reduce the force at which the material is pushed into the mould,cutting down the flash.for non PLC machine,reduce their injection limit.
3. Reduce charging limit(End) And injection.
4.Temperature.
Reducing the hoper and barrel temperature is one crude way i use in controlling excess flash on products.
While you reduce the temperatures make sure it does'nt fall bellow the acceptable range,if it does,you could do the screw serious damage.
Any of these methods will work for you.
Reduce plastic wast and maximize time.
If a product comes out of a machine with flash all over it, it gives it an ugly and unpresentable outlook.
flashes are normally trimmed out of the product, before supply.
There are a number of ways to control flashes on products.
1. Clamp the mould:
IF your machine has not reached its farward limt,slightly increase mould advance,then check for changes.
2.Reduce first injection pressure:
Normally,the first injection is asigned the highest pressure,and thus play an important role in filling a product.if you reduce it, you reduce the force at which the material is pushed into the mould,cutting down the flash.for non PLC machine,reduce their injection limit.
3. Reduce charging limit(End) And injection.
4.Temperature.
Reducing the hoper and barrel temperature is one crude way i use in controlling excess flash on products.
While you reduce the temperatures make sure it does'nt fall bellow the acceptable range,if it does,you could do the screw serious damage.
Any of these methods will work for you.
Reduce plastic wast and maximize time.
Thursday 25 August 2011
Why Plastic Plants Fold-Up In Nigeria
Their are two basic reasons why at least seventy percent of indegenous industry colapse after running for few years.
In Nigeria you hardly find a plastic industry survive a decade.
In industrial cities such as;Aba and kanu you find a lot of ware house wasting away, with machine after trying to run such industries at several occation without any positive outcome.
To succesfully run a plastic plant,their is need for:
*A good management team.
*Technical know how.
A plastic plant will hardly survive its first year of establishment without;proper management and skill.
If you are finding it difficult to run and maintain your plant,trust me you need to over-haul your management and technical crew.
In Nigeria you hardly find a plastic industry survive a decade.
In industrial cities such as;Aba and kanu you find a lot of ware house wasting away, with machine after trying to run such industries at several occation without any positive outcome.
To succesfully run a plastic plant,their is need for:
*A good management team.
*Technical know how.
A plastic plant will hardly survive its first year of establishment without;proper management and skill.
If you are finding it difficult to run and maintain your plant,trust me you need to over-haul your management and technical crew.
Wednesday 24 August 2011
Why You Need an expert.
If you have thought about establishing a plastic industry but dont know where to start this is where to start.
Let me first assure you that the plastic industry is doing great in Nigeria, it is an investment you will never regreat.
Sadly a lot of plastic industry wind up after investing hudge amount of money into a supposed great project.Reasons for such failure ranges from poor management to lack of technical know how.
This is where we come in.we have all it takes to make your dreams realities-management to technicality.
We thus provide the following services:
* Factory layout and machine installation.
*Maintenance and repair.
*Man power development.
* General management and consultancy.
Together we shall make your dreams come true.
Let me first assure you that the plastic industry is doing great in Nigeria, it is an investment you will never regreat.
Sadly a lot of plastic industry wind up after investing hudge amount of money into a supposed great project.Reasons for such failure ranges from poor management to lack of technical know how.
This is where we come in.we have all it takes to make your dreams realities-management to technicality.
We thus provide the following services:
* Factory layout and machine installation.
*Maintenance and repair.
*Man power development.
* General management and consultancy.
Together we shall make your dreams come true.
Subscribe to:
Posts (Atom)